Superior 28-6202 3" x 7" Stainless Steel, Slant Bolt-On Exhaust Tip

Superior 28-6202 3" x 7" Stainless Steel, Slant Bolt-On Exhaust Tip Review

Superior 28-6202 3" x 7" Stainless Steel, Slant Bolt-On Exhaust Tip Feature

• Fits 1.75 - 2.5" Pipe
• Thick Custom Rolled Edge
• Stainless Steel
• Easy to Install
• Expensive High End Look

Superior 28-6202 3" x 7" Stainless Steel, Slant Bolt-On Exhaust Tip

DEI 010131 Titanium 2" x 25' Exhaust Wrap

DEI 010131 Titanium 2" x 25' Exhaust Wrap Review

DEI 010131 Titanium 2" x 25' Exhaust Wrap Feature

• 2 inch wide and 100 feet long
• Universal application

DEI 2" x 25 feet Titanium Exhaust Wrap has an universal application. It is 2 inch wide and 25 feet long.

Universal Fit Muffler Exhaust Polished Stainless Steel w/burnt tip and silencer 2.5"inlet to 4"outlet (New)

Universal Fit Muffler Exhaust Polished Stainless Steel w/burnt tip and silencer 2.5"inlet to 4"outlet (New) Review

Universal Fit Muffler Exhaust Polished Stainless Steel w/burnt tip and silencer 2.5"inlet to 4"outlet (New) Feature

• You can now customize the look, sound and performance
• For your car and SUV with our Racing polished stainless steel Universal Fit Muffler.
• These universal high performance mufflers r engineered to maximize the performance to your vehicle.
• Brand new in box
• Inlet 2.5" to 4" Outlet with burnt tip and silencer

The Stainless Steel Muffler is one of the most advanced in design, it is made from the highest quality stainless steel, tuned for sound and performance. The muffler core is packed with temperature absorbing glass wool and stainless protective mesh. This performance muffler is designed to unleash more horsepower and sound over the stock exhaust system. By installing this universal high performance muffler exhaust, you can get up to 8 horsepower increase over the stock muffler, by improving the exhaust gas flow rate through the exhaust system

Walker Exhaust 36272 Hardware-Hanger-Universal

Walker Exhaust 36272 Hardware-Hanger-Universal Review

Walker Exhaust 36272 Hardware-Hanger-Universal Feature

• Walker 36272 Exhaust Product

Walker has everything from brackets and clamps to connectors and specialty pipes - all the accessories you need to do the complete exhaust job. Walker is your one-stop exhaust shop offering a full line of pipes and accessories.

HeatShield 322026 Black 2" Wide x 25' Exhaust Wrap Kit

HeatShield 322026 Black 2" Wide x 25' Exhaust Wrap Kit Review

HeatShield 322026 Black 2" Wide x 25' Exhaust Wrap Kit Feature

• Rated for 1200 degree Fahrenheit continuous use, 2000 degree Fahrenheit intermittent
• Reduces under hood temperatures up to 50 percentage
• Increases horsepower
• Includes locking ties
• All rolls of exhaust wrap are 1/16 inches thick

Black exhaust wrap Kit includes easy to read instructions and Their stainless steel locking ties. Black header wrap maintains hotter exhaust gases, decreases the density, and that allows the exhaust gas to exit the system faster. Increased exhaust scavenging is produced and helping to lower intake temperatures: that equals more horsepower. Black exhaust wrap kits also reduces radiant heat damage and can lower under hood temperatures by as much as 50 percent. This exhaust wrap features a proprietary black coating, it holds its color longer than similar graphite coated wraps. It can withstand 1200F continuous and 2000F intermittent. The black exhaust wrap kit is asbestos free and is made from a base high quality fiberglass yarn. Black exhaust wrap is noncombustible, it is also water and fungus resistant. Always wear safety glasses, dust mask, gloves and long sleeves are recommended when handling this exhaust header wrap.

Magnaflow 35129 Stainless Steel 2.25" Exhaust Tip

Magnaflow 35129 Stainless Steel 2.25" Exhaust Tip Review

Magnaflow 35129 Stainless Steel 2.25" Exhaust Tip Feature

• Reduces exhaust gas pressure and enhances the performance of the exhaust system
• Manufactured from high strength stainless steel
• Easy to install
• Corrosion resistant
• Backed by lifetime warranty

Magnaflow Stainless Steel 2.25 inch Exhaust Tip is designed to reduce exhaust gas pressure and enhances the performance of the exhaust system. It is manufactured from high strength stainless steel and come in mirror-like finish. This exhaust tip feature a inch tip. It is corrosion resistant and is backed by lifetime warranty.

Innovate Motorsports 3728 Exhaust Clamp Cast-Stainless

Innovate Motorsports 3728 Exhaust Clamp Cast-Stainless Review

Innovate Motorsports 3728 Exhaust Clamp Cast-Stainless Feature

• Patent-pending
• Venturi-effect
• Made out of industry grade Cast-Stainless Steel

The Innovate Exhaust Clamp for O2 Sensor features a Patent-pending, Venturi-effect, tapped exhaust clamp for obtaining accurate lambda measurements in non-cat autos or other engines.

DC Sport EX-5016 Stainless Steel Round Muffler and Slant Cut Exhaust Tip

DC Sport EX-5016 Stainless Steel Round Muffler and Slant Cut Exhaust Tip Review

DC Sport EX-5016 Stainless Steel Round Muffler and Slant Cut Exhaust Tip Feature

• Muffler fits 2-1/4in inlet x 3-3/4in outlet x 16-1/4in long
• 100 % stainless steel mirror like polish finish
• Increase horsepower
• Reduce back pressure

DC Sports mufflers are made to replace your vehicle's factory muffler which offers improved looks and deeper tones.

Tanabe T70113A Medalion Touring Cat-Back Dual Muffler Rear Section Exhaust System for Lexus IS250 2WD/AWD/350 2006-2009

Tanabe T70113A Medalion Touring Cat-Back Dual Muffler Rear Section Exhaust System for Lexus IS250 2WD/AWD/350 2006-2009 Review

Tanabe T70113A Medalion Touring Cat-Back Dual Muffler Rear Section Exhaust System for Lexus IS250 2WD/AWD/350 2006-2009 Feature

• Special dual wall angle-cut tip
• Slim-line oval canister with high ground clearance
• Highest grade SUS304 construction
• Piping is straightest form and mandrel bent
• For weight reduction 1.2 millimeter thinwall piping, hallow exhaust hanger and pressed flanges are used

Using the all new 'continuous strand' Advantex packing material technology, Medalion Touring achieves extremely high levels of exhaust system efficiency, while maintaining a street drivable, extremely low frequency and deep tone that is well under 93db for discreet sports.

Dynomax 33226 Stainless Steel Hardware Clamp Band

Dynomax 33226 Stainless Steel Hardware Clamp Band Review

Dynomax 33226 Stainless Steel Hardware Clamp Band Feature

• Construction ensures superior sealing
• Strength and durability for long service life
• Lap Joint
• Stainless steel
• Preformed

Walker has everything from brackets and clamps to connectors and specialty pipes - all the accessories you need to do the complete exhaust job. Walker is your one-stop exhaust shop offering a full line of pipes and accessories.

Borla 11775 Rear Section Exhaust Kit - CAMARO '10 6.2L V8 AT/MT RWD 2DR

Borla 11775 Rear Section Exhaust Kit - CAMARO '10 6.2L V8 AT/MT RWD 2DR Review

Borla 11775 Rear Section Exhaust Kit - CAMARO '10 6.2L V8 AT/MT RWD 2DR Feature

• Piping diameter: 2.5"
• Exit: Split rear
• Tip style: Single round rolled angle cut
• Tip Size: 4.5" round X 5.75"
• S-type' muffler

Borla rear section exhaust installs using the factory clamp-on connection just before the rear muffler assembly. Borla, the original pioneers of high quality, austenitic stainless steel (superior to T-409 or aluminized steel) free flow exhaust utilizes its patented award and race winning technology to deliver quality, sound, performance gains and enhanced fuel economy – all with an easy bolt-on installation. All Borla street products carry the famous Borla written million-mile warranty. This exhaust kit has a piping diameter of 2.5 inches and a split rear exit. It also features a single round rolled angle cut style tip of size 4.5 inches round x 5.75 inches and an 'S-type' muffler.

Innovate Motorsports 3736 Stainless Steel Exhaust Bung and Plug Kit

Innovate Motorsports 3736 Stainless Steel Exhaust Bung and Plug Kit Review

Innovate Motorsports 3736 Stainless Steel Exhaust Bung and Plug Kit Feature

• Standard size used in all O2 sensors
• Stainless-Steel Bung and Plug
• 1/2 inch tall, thread 18mm x 125

Innovate Motorsports Stainless-Steel Bung and Plug kit (18mm x 1.25) is used for placement of a O2 sensor in the vehicles exhaust system. The bung is welded into the exhuast and the O2 sensor (Narrowband or Wideband) screws into the bung allowing the sensor tip to be exposed to the exhaust gas in the pipe. Note: Plug is Mild-Steel.

DC Sport EX-5015 Stainless Steel Round Muffler and Slant Cut Exhaust Tip

DC Sport EX-5015 Stainless Steel Round Muffler and Slant Cut Exhaust Tip Review

DC Sport EX-5015 Stainless Steel Round Muffler and Slant Cut Exhaust Tip Feature

• Muffler fits 2-1/2in inlet x 4in outlet x 21-1/2in long
• 100 % stainless steel mirror like polish finish
• Increase horsepower
• Reduce back pressure

DC Sports mufflers are made to replace your vehicle's factory muffler which offers improved looks and deeper tones.

Flowmaster 15362 3.00" Stainless Steel Exhaust Tip

Flowmaster 15362 3.00" Stainless Steel Exhaust Tip Review

Flowmaster 15362 3.00" Stainless Steel Exhaust Tip Feature

• Highly polished round tip with rolled edge
• Flowmaster logo embossed 3.00 inch tip
• Angle cut design
• Weld on installation
• Sold individually

Exhaust tip has a logo embossed polished stainless steel, straight edge angle cut, 3.00 inch tip diameter X 2.50 inch pipe diameter X 13.00 inch length, weld on installation.

Lisle 38350 Exhaust Removal Pliers

Lisle 38350 Exhaust Removal Pliers Review

Lisle 38350 Exhaust Removal Pliers Feature

• Separates exhaust hanger brackets from rubber supports
• Comes in skin-pack
• The exhaust pliers works on all import and domestic car and truck exhaust systems that use the rubber hanger supports
• Simply squeeze the pliers handles to force the bracket from the rubber support

Separates exhaust hanger brackets from rubber supports. The exhaust pliers works on all import and domestic car and truck exhaust systems that use the rubber hanger supports. Simply squeeze the pliers handles to force the bracket from the rubber support. Comes in skin-pack.

Magnaflow 17979 Pro Series Stainless Steel 4" Single Turbo-Back Exhaust System

Magnaflow 17979 Pro Series Stainless Steel 4" Single Turbo-Back Exhaust System Review

Magnaflow 17979 Pro Series Stainless Steel 4" Single Turbo-Back Exhaust System Feature

• Increases performance of both horse power and torque
• Manufactured from high grade stainless steel and have a satin finish
• Features band clamps and mandrel-bent tubing
• Facilitates easy installation
• Corrosion resistant

Magnaflow Pro Series Stainless Steel 4 inch Single Turbo-Back Exhaust System increases performance of both horse power and torque. It is manufactured from high grade stainless steel and comes with a satin finish. This exhaust system features band clamps and mandrel-bent tubing. It facilitates easy installation and is corrosion resistant.

DEI 010110 Black HT Coating Exhaust Wrap Kit

DEI 010110 Black HT Coating Exhaust Wrap Kit Review

DEI 010110 Black HT Coating Exhaust Wrap Kit Feature

• Black Exhaust Wrap
• Black HT Silicone Spray
• Locking Ties
• Kit includes 2 rolls of exhaust wrap, 1 can of HT Silicone Coating, eight 8" stainless steel locking ties and four 14" stainless steel locking ties
• This item is not for sale in Catalina Island

Everything you need for a professional installation in one kit. Includes 2 roll of 2" x 50' exhaust wrap, 1 can HT Silicone Coating, Stainless Steel Locking Ties (eight 8" and four 14") are included. The header wrap kit is enough for any set of V8 headers. The Header Wrap Kit will wrap from the top of the header where it bolts to the heads all the way down to the collector. Exhaust Wrap Kits save you time and money.